Install Hardware Wall Mounted Drop Leaf Table
Wall Mounted Drop Leaf Table – For dining rooms or kitchens that do not have a large amount of space and occasionally need to accommodate the company, a folding wing table is a useful element. Hinged desks with hinges have ends that can increase or decrease depending on the amount of table space is necessary. Table hinges can wear out or fall off after several years of frequent use. In replacement of the old hinge with a new take little effort, skill or tools.
Flip the wall mounted drop leaf table upside down and the falling leaves open so they are supported on the ground. Make a mark on the hinge pin is at the bottom of the table to help you know exactly where to place the new hinge. Remove the old hinge if still attached. Use the screwdriver to remove all the screws and store the hinge in a zippered plastic bag to take to the hardware store with you. Go to the hardware store and buy a new hinge that is as close as possible to the old hinge in size and design.
Ask a store clerk to help you if necessary. Hold the wall mounted drop leaf table upside down and open fully on the floor to secure the new hinge. Make sure your new screws are deep enough to fasten the hinge to the bottom of the table, but not too long that they go through the top. Install the screws with a screwdriver.wall mounted drop leaf table